The Vello Battery Grip for Sony a7 III Series?can be installed directly into the camera's battery chamber, just remove the door and attach it to the side of the grip's stem. Align the grip and camera contacts inside the chamber to ensure power is being supplied to the camera, and tighten the grip against the body via the thumbscrew in the 1/4"-20 tripod socket.





Once the grip is installed, it accepts two NP-FZ100 rechargeable batteries which doubles the camera's battery life and shooting time. The grip offers a comfortable, extended, rubberized, nonslip grip, and a shutter release button for vertical use. It also provides front and rear dials, C1 and C2 function buttons, AF-ON and AEL buttons, and a Multi-Selector Joystick, so you still maintain full functions of the camera while shooting vertically.





The grip maintains tripod support with the threaded 1/4"-20 socket on the bottom, and a strap mount on the side, so a hand or shoulder strap can be securely attached. Vello recommends aligning the mounting stud to the camera's socket, to prevent the camera's threads from stripping when mounting the grip.The FreeWave Plus Remote Shutter Release from Vello is a wireless shutter release set that allows select Sony Multi-Terminal cameras to be triggered remotely to get shots from distances as far as 320' away. Multiple available shooting modes allow shooting in single, continuous, four-second delay, and bulb modes. The dual-function release enables pre-focusing by half-pressing the trigger button, then firing the shutter release by fully pressing. LED indicators confirm pre-focus and exposure status. The compact transmitter and remote receiver unit are each powered by two AAA batteries.The Screen Protector Ultra II from Vello shields your camera's LCD screen from scratches, dust, smears, and impacts. It is designed to custom fit the screen dimensions of the Sony a1, a7R IV, a7R III, a7R II, a7S III, a7S II, a7 III, a7 II, a7C, a9 II, a9, RX10 II, RX10 III, RX10 IV, RX100 II, RX100 IV, RX100 V, RX100 VI, RX100 VII, ZV-E10, ZV-1F, ZV-1 II, ZV-1, FX3, or FX30 camera. Made from ultrathin, shatterproof optical glass, it practically disappears once applied to your camera's display. Unlike flexible material screen protectors, it won't trap air bubbles against the screen when applied. It blocks UV rays and has an antireflective coating for easy viewing in any lighting conditions. The Screen Protector Ultra II supports touchscreen operation when used with touchscreen-enabled cameras. Designed for long-term use, it easily attaches with static adhesion that won't leave a residue when removed.The Cap Keeper Plus Lens Cap Holder from Sensei prevents the loss of lens caps. An adhesive-backed disc secures the lens cap to the elastic leash which wraps around the lens barrel. With the lens cap removed from the lens while shooting, it hangs out of the way but secure and within reach for easy retrieval. The Cap Keeper Plus is made with tough and extremely secure elastic.The Watson NP-FZ100 V3 Lithium-Ion Battery Pack is compatible with the same camera models as the Sony NP-FZ100 battery, and also supports the latest generation camera models. This replacement battery pack features a capacity of 2250mAh, 7.2V of output power, and 16.2 watt-hours. Small and lightweight, lithium-ion batteries can be charged or discharged at any time in their load cycle without developing memory effect.